Language:

  • Русский
  • English
WaveCam MX-A IP camera

WaveCam MX ip camera with PIXIM sensor, high resolution and progressive scan, Duplex Audio, Colour and B&W mode

  • Features
  • Specifications
  • Dimensions

PIXIM Sensor

Wide dynamic range sensors PIXIM allows surveillance without loss of image information content. The sensor is almost impossible to flare and is working perfectly shaded part of the scene. Thus, the effectiveness of surveillance is increased to 40%.

Duplex Audio

Connect the microphone allows you to hear what's going on at the facility surveillance. In addition to the ip camera WaveCam MX-A is possible to connect the speaker that allows alert people in the zone of surveillance of the possible danger.

Power over Ethernet

Power over Ethernet (PoE) provides power to the ip cameras over the Ethernet-cable. To the camera, enabled for PoE, no need to conduct electricity grid, which can significantly reduce the cost of installing video surveillance systems.

IP camera WaveCam MX-A Specifications

Image sensor 1/3˜ CMOS PIXIM with progressive scan
Minimal illumination Colour: 1 lux; BW: 0.1 lux, F1.4
Dynamic range Up to 120 dB
Compression algorithm MotionWavelet (interframe/frame-by-frame)
Resolution PAL: 768х576, 704x544, 352x272
NTSC: 640х480, 320х240
Frame rate PAL/NTSC 25/30 fps for any of the above mentionned resolution
Image settings Compression: 20 levels;
Image alignment: 0, 180°;
Automatic white balance, automatic sensitivity control, flare compensation, auto swich Colour/BW mode.
Audio Duplex, Audio IN and Audio OUT: PCM, 16 kHz, 16 bit
Security Access levels with password protection
Lens type Manual aperture or DC-Iris lens; bayonet CS, С with extender
Network interface Ethernet 10BASE-T/100BASE-TX
Throughput capacity control 64/128/256/512/1024/2048 Kbit/s and without limitations
Power supply 5,5-48 V DC or
Power over Ethernet (IEEE802.3af class 2)
Power consumption 4 Watt
Conditions of operation -10 ~ +50 °C (14 ~ 122 °F), humidity up to 90% RH (non-condensing)
Processor, memory Network processor: Ubicom IP5160
Media processor: Nexperia PNX1502
RAM: 32 Mb, Flash: 4 Mb
Access via WEB-browser Live video, change network settings, configure the display options
Minimum Web browsing requirements Pentium 4 CPU 1300 MHz or higher, or equivalent AMD 256 MB RAM
Graphics card, Direct Draw, 64 Mb RAM
Windows XP, Server 2003, DirectX 9.0 or later, Internet Explorer 6.0 or later.
Supported protocols IPv4, TCP/IP, DHCP, UDP, HTTP
Dimensions (L x W x H),
weight (without lens)
147x83x41 mm (5.79˜ x 3.27˜ x 1.61˜),
205 g (8 oz)

IP camera WaveCam MX-A dimensions